PU waterproof coatings
BIOGO-WS — Water-Based PU Waterproof Coating
Single-component water-based polyurethane coating for concrete and suitably prepared metal roofs. Available in UV-resistant and non-UV-resistant grades to match exposed or protected waterproofing assemblies.
Product image
Recommended applications
Building roofs, prepared metal roofs, below-ground works and indoor waterproofing.
Key product data
| Pack | 25 kg |
|---|---|
| Reference consumption at 1 mm | 2.0–2.2 kg/m² |
| Application temperature | 5–35°C |
Reference information from the supplied product data. Performance and consumption depend on the grade and application conditions; confirm details in the batch documentation.
Standards & test methods
Reference standards and test methods stated in the product technical data. Test conditions: 23 ±2°C; relative humidity 50 ±10%.
| Property / condition | Technical requirement / reference value |
|---|---|
| Solids content | ≥60% |
| Density (g/mL) | Measured value to be reported; no numeric value supplied |
| Tack-free time | ≤4 h |
| Through-dry time | ≤12 h |
| Tensile strength | ≥2.0 MPa |
| Elongation at break | ≥500% |
| Tear strength | ≥15 N/mm |
| Low-temperature flexibility | -35°C; No cracking |
| Watertightness: 0.3 MPa, 120 min | No leakage |
| Elastic recovery | ≥70% |
| Bond strength: standard conditions | ≥1.0 MPa |
| Bond strength: wet substrate | ≥0.5 MPa |
References reproduce the editions listed in the product data. Confirm the required edition, selected grade and supporting test report for consultant approval.
Application & selection notes
For hot, dry site conditions, check substrate temperature, moisture, working time and curing before application. The heat resistance of a cured membrane does not permit installation outside the application limits in its TDS.
Specify for Saudi Arabia, UAE & GCC projects
Send the project location or destination port, application, substrate, required thickness, area in m², quantity and delivery schedule. Request the selected grade, export packing, TDS and batch documentation for consultant review. Manufactured in China; project approvals are reviewed for each enquiry.
Contact the export team