Bituminous coatings
BIOGO-NRC — Non-Curing Rubberised Bitumen Waterproof Coating
Hot-applied, permanently tacky rubberised bitumen coating for composite coating-and-membrane waterproofing. Its creep and self-sealing characteristics help accommodate movement and difficult below-ground details.
Product image
Recommended applications
Basements, non-exposed roofs, planted-roof assemblies and complex details.
Key product data
| Pack | 25 kg |
|---|---|
| Reference consumption at 1 mm | ≈1.3 kg/m² |
| Solids | ≥98% |
Reference information from the supplied product data. Performance and consumption depend on the grade and application conditions; confirm details in the batch documentation.
Standards & test methods
Reference standards and test methods stated in the product technical data. Test conditions: 23 ±2°C; relative humidity 50 ±10%.
| Property / condition | Technical requirement / reference value |
|---|---|
| TDS standard reference | JC/T 2428-2017 |
| Flash point | ≥180°C |
| Solids content | ≥98% |
| Adhesion: dry and damp substrates | 100% cohesive failure within the coating |
| Extensibility | ≥15 mm |
| Low-temperature flexibility | -20°C; No cracking |
| Heat resistance | 65°C; No flowing, sliding or dripping |
References reproduce the editions listed in the product data. Confirm the required edition, selected grade and supporting test report for consultant approval.
Application & selection notes
For hot, dry site conditions, check substrate temperature, moisture, working time and curing before application. The heat resistance of a cured membrane does not permit installation outside the application limits in its TDS.
Specify for Saudi Arabia, UAE & GCC projects
Send the project location or destination port, application, substrate, required thickness, area in m², quantity and delivery schedule. Request the selected grade, export packing, TDS and batch documentation for consultant review. Manufactured in China; project approvals are reviewed for each enquiry.
Contact the export team