PU waterproof coatings
BIOGO-ES — UV-Resistant PU Waterproof Coating for Exposed Roofs
Single-component aliphatic polyurethane waterproof coating for exposed roofs, terraces and balconies. Its UV-resistant formulation is intended for weather-exposed waterproofing and roof refurbishment.
Product image
Recommended applications
Exposed concrete roofs, terraces, balconies and roof renovation.
Key product data
| Pack | 20 kg |
|---|---|
| Reference consumption at 1 mm | 1.4 ± 0.05 kg/m² |
| Application temperature | 5–35°C |
Reference information from the supplied product data. Performance and consumption depend on the grade and application conditions; confirm details in the batch documentation.
Technical parameters & standards
Density: 1.25–1.35 kg/L. All data measured at 23°C. The table shows the technical requirements and results reported in the BIOGO-ES product data.
| Property | Technical requirement / test method | Reported result |
|---|---|---|
| Solid content (%) | ≥85.0 | 90 |
| Surface dry time (h) | ≤12 | 4.0 |
| Full dry time (h) | ≤24 | 12 |
| Tensile strength (MPa) | ≥2.0 | 3.6 |
| Elongation at break (%) | 500 | 620 |
| Tear strength (N/mm) | ≥15 | 18 |
| Low-temperature flexibility | -35°C, no cracking | -35°C, no cracking |
| Impermeability | 0.3 MPa, 120 min, no leakage | 0.3 MPa, 120 min, no leakage |
| Adhesion strength (MPa) | ≥2.0 | 2.0 |
| UV lamp exposure | ASTM G154 | 2745 h |
References reproduce the editions listed in the product data. Confirm the required edition, selected grade and supporting test report for consultant approval.
Application & selection notes
For hot, dry site conditions, check substrate temperature, moisture, working time and curing before application. The heat resistance of a cured membrane does not permit installation outside the application limits in its TDS.
Specify for Saudi Arabia, UAE & GCC projects
Send the project location or destination port, application, substrate, required thickness, area in m², quantity and delivery schedule. Request the selected grade, export packing, TDS and batch documentation for consultant review. Manufactured in China; project approvals are reviewed for each enquiry.
Contact the export team